Advanced Pool
School
How to
Clean Your Salt Cell
1. Turn pump and filter
off
2. Remove the cell from its
position in the plumbing by loosening the unions on both ends of the
cell.
3. You will need a small
plastic bucket, water, and muriatic acid
4. Fill the bucket with 3-4" of
water.
5. Set the turbo cell on end in
the water.
6. Add 1- 1/2" of muriatic acid
to the water in the bucket. Let the cell sit in the solution for 5
minutes.
7. Turn the cell over and let
the opposit end sit in the solution for 5 minutes. You will submerse the cord,
which will not be affected by the mild acid solution
8. Look in both ends of the
cell to assure calcium deposits are removed, if not repeat cleaning
procedure.
9. Rinse cell with fresh water
and replace in the plumbing line securely. Tighten the unions before restoring
power to the pump. - excerpted from Hayward
**I would recommend using
chemical resistant gloves**- excerpted from Jamie's common sense
When Do I Clean My Salt
Cell?
The cell requires maintenance
when the "Inspect cell" light comes on. It should routinely be cleaned every 3-6
months. Parrot Bay can also clean your cell for you during openings or closing
or any time requested.
|